Endex 155

Technical Data Sheet Endex™ 155 Hydrocarbon Resin

Applications 

• Adhesives/sealants-b&c

• Bookbinding

• Carpet construction

• Case & carton sealing closings

• Casting wax

• Commerical printing inks

• Concrete

• Film modification

• Hygiene adhesives

• Labels non food contact

• Marine

• Packaging components non food contact Packaging tape

• Polymer modification

• Protective coatings

• Roofing

• Solvent borne packaging adhesives Specialty tape

• Tape non food contact

• Tires

Key Attributes

• Heat stability

• Pure aromatic monomer composition Very high softening point 

• Water-white initial color
  
  

  
  

Product Description

A water-white thermoplastic resin made from purified aromatic hydrocarbon monomers. Used to modify the melt flow and increase the temperature resistance of styrenic plastic and rubber. Reinforces the styrene end blocks of styrenic block copolymers. In adhesives Endex™ 155 hydrocarbon resin will associate with the styrenic endblocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties.

Typical Properties

Compatibility and Solubility

Compatible with polystyrene or styrene-containing polymers. Incompatible with polyolefins, natural rubber, butyl rubber, EPDM, and EVA. Soluble in aliphatic, aromatic, and chlorinated hydrocarbons; esters; and ketones. Insoluble in alcohols and glycols; limited solubility in nitroparaffins. For low or zero VOC systems Endex™ 155 is soluble in the VOC exempt solvents t-butyl acetate (TBA) and perchlorobenzenetetrafluoride (PCBTF) and will tolerate some acetone and/or methyl acetate as a diluent in solvent systems based on TBA and/or PCBTF. VOC exemptions and environmental regulations vary regionally and compliance with local standards should be verified before any claims about VOC content are made.

Packaging

Pastilles, in multiwall paper bags (50 lbs, 22. 7 kg net wt).

Storage

Due to the thermoplastic behavior, pastillated and flaked resins may fuse, block or lump. This can be accelerated under any of the following conditions: 1) above ambient temperature, 2) prolonged storage, 3) pressure, e.g., stacking pallets, or a combination of these conditions. This is particularly applicable for low softening point resin grades.

In order to maintain the flake or pastille shape, we therefore recommend storing the material in a temperature-controlled area, be careful with stacking material or applying pressure and preventing prolonged storage.

It should be noted that lumping does not have a negative impact on the product specifications. Due to the nature of the product, claims regarding lumping cannot be accepted.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

无锡市镒远新材料科技有限公司专业供应美国伊斯曼公司（EASTMAN）进口纯单体树脂，碳氢树脂，增粘树脂、烃树脂、防湿滑树脂。品种齐全，无锡现货，用途广泛，适用于塑料，橡胶，胶粘剂的改性与增粘，具有非常好的色度（水白色）和稳定性，可加强耐热性和强度等多种性能。

生产商：美国伊斯曼公司EASTMAN

公司：无锡市镒远新材料科技有限公司

联系方式：13951578110

牌号有：

1）Kristalex  5140（LV、SD）

2）Kristalex  1120

3）Kristalex  3115

4）Kristalex  3100

5）Kristalex  3085

6) Kristalex  F 115

7) Kristalex  F 100

8) Kristalex  F 85

9）Piccotex  LC

10）Piccotex  100

11）Piccotex  120

12）Piccolastic   D125

13）ENDEX 155

14）ENDEX 160

15）Plastolyn 240

16）Plastolyn 290

17）Piccolastic A75

18）Kristalex  3105

19) Impera1504

应用：1.胶黏剂产品：比如是各种SBS，SIS，SEBS，EVA，聚氨酯、氯丁胶粘剂、包装胶、毛纺布粘合等类型的胶粘剂的增粘剂、增强剂和改性剂。

2.油墨、涂料行业：提高柔韧性，拉伸力、粘结强度，耐油墨溶剂改进时间和凝结时间。

3.橡塑改性，提高加工表面和产品物性。

4.弹性体（TPE、TPR）包胶改性等。